CS Time/TNA Documents

username password

Send Email Settings

    Table of contents
    1. 1. Configure FTP Settings

    This task enables you to configure the system for sending a window’s information via e-mail when using the Send To button. To configure the system using the wizard, proceed as follows:
     

    1. Select the Configure Send Email Settings option from the toolbar Task drop-down menu and the Configure Send Email Settings wizard window will be displayed.
       

    Email-1.png
     

    1. Select the Next button to continue.
       

    Email-2.png
     

    1. The next window is used to enter the IP address or Name of the SMTP mail server and also the Port number to be used. The Test Setting button can be used to check if the information entered is correct or not. Once the correct information has been entered, select the Next button.
       

    Email-3.png
     

    1. The next window is used to enter the send From e-mail address and then select the Next button.
       

    Email-4.png
     

    1. If the SMTP mail server requires a User name and Password, use this window to enter the required information. Once completed select the Next button.
       

    Email-5.png
     

    1. The next window is used to enter the e-mail address of the TNA Supplier or the address when Support is required. The Send Test button can be used to send a test e-mail to the address entered to ensure that the information that has been entered is correct. Select the Next button.
    2. The next window now enables the settings to be saved by selecting the Finish button.

    Configure FTP Settings


    This task enables you to configure the system for sending a window’s information using the FTP option when using the Send To button. To configure the system using the wizard, proceed as follows:

    1. Select the Configure FTP Settings option from the toolbar Task drop-down menu and the Configure FTP Settings Wizard window will be displayed. Select the Next button to continue.
       

    FTP-1.png
     

    1. Enter in the required FTP Server IP address and Port that are to be used and then select Next.


    FTP-2.png
     

    1. Enter the Directory on the FTP Server where the TNA data is to be saved to and then select Next.
       

    FTP-3.png
     

    1. If a User Name and Password are required to connect and upload data to the server, enter the information and select Next.
       

    FTP-4.png
     

    1. If Passive Mode is supported select this option and then select Next.
       

    FTP-5.png
     

    1. Now that all the required information has been entered, select Finish to complete this task.

     

    FTP-6.png
     

     

     

    Permalink:  http://tinyurl.com/o86z7lm

    Page last modified 12:32, 22 Jul 2014 by cay-lynne CS Time/TNA Documents > Configuration Module > Send Email Settings

    Comments0

    You must login to post a comment.
    Attach file

    Files11

    Powered by MindTouch Core